Driveways and paths · Kent

Red tarmac driveways in Gravesend

Planning a red tarmac driveway in Gravesend? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

GRAVESEND GUIDE£82–£127 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

Red tarmac driveway prices in Gravesend

For Gravesend, we apply the South East rate, about 10% above our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£82–£127 per m²
Example: 30 m² drive£2,700–£4,150
Example: 50 m² drive£4,100–£6,350
Example: 80 m² drive£6,600–£10,100

As a 2026 guide in Gravesend, red tarmac driveway work runs at about £82–£127 per m² including VAT, so a 80 m² drive is roughly £6,600–£10,100. Guide only; the survey confirms a fixed price.

The build-up we price

Surface course20–30 mm red pigmented AC 6Binder course50–60 mm black AC 20Sub-baseabout 150 mm MOT Type 1Edgescharcoal blocks or kerbsINDICATIVE CROSS-SECTION · NOT TO SCALE

What we do on a red tarmac driveway

Pigmented red asphalt on the same full build, often framed with a charcoal block border.

  • Full dig-out and MOT Type 1 sub-base, about 150 mm
  • Black AC 20 binder course, about 50–60 mm
  • Contrasting block or kerb border as edge restraint
  • Colour sample discussed before ordering
  • Falls and drainage set as for any new drive

Covering Gravesend

Gravesend at a glance. Gravesend sits 14 miles from Maidstone, within our regular Kent cover.

Postcodes
DA11, DA12, RM18, DA13
Area
Kent
Nearest towns
Swanscombe (3 miles), Grays (3 miles), Strood (6 miles), South Ockendon (6 miles)
Pricing
South East, about 10% above our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Swanscombe, Grays, Strood, South Ockendon, Stanford-le-Hope.

Rules that apply in Gravesend

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Your questions answered

Will someone visit before I get a fixed price in Gravesend?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What approvals apply in Gravesend?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How much does a red tarmac driveway cost in Gravesend?

As a 2026 guide in Gravesend, red tarmac driveway work runs at about £82–£127 per m² including VAT, so a 80 m² drive is roughly £6,600–£10,100. Edging, drainage and a dropped kerb are priced separately where needed.

How long will the work take at my Gravesend property?

Usually 2–4 working days. We book Gravesend surveys alongside other jobs in Kent, and give you dates once the specification is agreed.

Other work in Gravesend

Questions about red tarmac driveways in Gravesend? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

Red tarmac driveways in Gravesend: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price