Driveways and paths · Isle of Wight

Red tarmac driveways in Sandown

Every red tarmac driveway we price in Sandown comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

SANDOWN GUIDE£91–£139 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

What does a red tarmac driveway cost in Sandown?

For Sandown, we apply the South East rate, including a travel and haulage allowance because work here is by arrangement. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£91–£139 per m²
Example: 30 m² drive£3,000–£4,600
Example: 50 m² drive£4,550–£6,950
Example: 80 m² drive£7,250–£11,150

As a 2026 guide in Sandown, red tarmac driveway work runs at about £91–£139 per m² including VAT, so a 80 m² drive is roughly £7,250–£11,150. Guide only; the survey confirms a fixed price.

Rules that apply in Sandown

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

What is included in a red tarmac driveway?

Pigmented red asphalt on the same full build, often framed with a charcoal block border.

  • Full dig-out and MOT Type 1 sub-base, about 150 mm
  • Red pigmented surface course, about 20–30 mm
  • Contrasting block or kerb border as edge restraint
  • Colour sample discussed before ordering
  • Falls and drainage set as for any new drive

How it is built

Surface course20–30 mm red pigmented AC 6Binder course50–60 mm black AC 20Sub-baseabout 150 mm MOT Type 1Edgescharcoal blocks or kerbsINDICATIVE CROSS-SECTION · NOT TO SCALE

Where we work in and around Sandown

What applies in Sandown. Sandown is covered by arrangement: we group work in the area to keep travel and haulage costs fair, and confirm any extra cost before you book.

Postcodes
PO36, PO37, PO35, PO38
Area
Isle of Wight
Nearest towns
Ryde (5 miles), Newport (Isle of Wight) (7 miles), Cowes (10 miles)
Pricing
South East rates plus a travel allowance (by arrangement)
Cover
By arrangement
Kerb approvals
The highway authority

Close to Sandown: Ryde, Newport (Isle of Wight), Cowes.

Sandown: common questions

How quickly can work start in Sandown?

Usually 2–4 working days. We book Sandown surveys alongside other jobs on the Isle of Wight, and give you dates once the specification is agreed.

Are there planning or highway rules in Sandown?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

What is the price of a red tarmac driveway in Sandown?

As a 2026 guide in Sandown, red tarmac driveway work runs at about £91–£139 per m² including VAT, so a 80 m² drive is roughly £7,250–£11,150. Edging, drainage and a dropped kerb are priced separately where needed.

Can I get a free survey in Sandown?

Sandown is covered by arrangement. We confirm any travel cost before booking the survey.

Also in Sandown

Tell us what you have in mind for Sandown and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Red tarmac driveways in Sandown: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price