Driveways and paths · Highland and Moray

Red tarmac driveways in Fort William

If you are weighing up red tarmac driveways in Fort William, the useful questions are about depth, edges and drainage. That's what our survey checks and what your quote spells out.

FORT WILLIAM GUIDE£81–£124 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

What does a red tarmac driveway cost in Fort William?

For Fort William, we apply the Scottish rate, including a travel and haulage allowance because work here is by arrangement. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£81–£124 per m²
Example: 30 m² drive£2,650–£4,100
Example: 50 m² drive£4,050–£6,200
Example: 80 m² drive£6,450–£9,900

As a 2026 guide in Fort William, red tarmac driveway work runs at about £81–£124 per m² including VAT, so a 30 m² drive is roughly £2,650–£4,100. Guide only; the survey confirms a fixed price.

Where we work in and around Fort William

The key facts for Fort William. Work in Fort William is by arrangement. Hot material has further to travel, so we group jobs and tell you about any travel cost first.

Postcodes
PH33
Area
Highland and Moray
Nearest towns
none within easy reach
Pricing
Scotland rates plus a travel allowance (by arrangement)
Cover
By arrangement
Kerb approvals
The council

Planning and kerb rules for Fort William

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Any new or widened crossing over the pavement needs approval from the council as roads authority.

How it is built

Surface course20–30 mm red pigmented AC 6Binder course50–60 mm black AC 20Sub-baseabout 150 mm MOT Type 1Edgescharcoal blocks or kerbsINDICATIVE CROSS-SECTION · NOT TO SCALE

What the price covers

Red tarmac is ordinary asphalt with a red pigment, and often red aggregate, in the surface course, laid on the same sub-base and binder course as a black tarmac drive.

  • Full dig-out and MOT Type 1 sub-base, about 150 mm
  • Black AC 20 binder course, about 50–60 mm
  • Red pigmented surface course, about 20–30 mm
  • Contrasting block or kerb border as edge restraint
  • Falls and drainage set as for any new drive

Fort William: common questions

Do I need permission for a red tarmac driveway in Fort William?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.

Which Fort William postcodes do you cover?

We cover Fort William including PH33. Work here is by arrangement.

How long does a red tarmac driveway take in Fort William?

Usually 2–4 working days. We book Fort William surveys alongside other jobs in Highland and Moray, and give you dates once the specification is agreed.

Will someone visit before I get a fixed price in Fort William?

Fort William is covered by arrangement. We confirm any travel cost before booking the survey.

Also in Fort William

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Fort William.

Free survey for new surfacing

Red tarmac driveways in Fort William: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price