Driveways and paths · Greater London

Red tarmac driveways in Ilford

We survey and price red tarmac driveways across Ilford and the IG1, E12, IG2 postcodes, with every layer and its depth written into the quote.

ILFORD GUIDE£90–£138 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

Red tarmac driveway prices in Ilford

These Ilford guide prices reflect rates in London, about 20% above our UK midpoint.

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£90–£138 per m²
Example: 30 m² drive£2,950–£4,550
Example: 50 m² drive£4,500–£6,900
Example: 80 m² drive£7,200–£11,050

As a 2026 guide in Ilford, red tarmac driveway work runs at about £90–£138 per m² including VAT, so a 30 m² drive is roughly £2,950–£4,550. Guide only; the survey confirms a fixed price.

How it is built

Surface course20–30 mm red pigmented AC 6Binder course50–60 mm black AC 20Sub-baseabout 150 mm MOT Type 1Edgescharcoal blocks or kerbsINDICATIVE CROSS-SECTION · NOT TO SCALE

Planning and kerb rules for Ilford

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Where we work in and around Ilford

Ilford at a glance. As one of the larger towns in Greater London, Ilford sees regular survey visits.

Postcodes
IG1, E12, IG2, IG3, IG4, IG5, IG6, IG7
Area
Greater London
Nearest towns
Barking (2 miles), Leytonstone (3 miles), Stratford (4 miles), Canning Town (4 miles)
Pricing
London, about 20% above our UK midpoint
Kerb approvals
The highway authority

The same service is available in Barking, Leytonstone, Stratford, Canning Town, Dagenham.

What the price covers

Red tarmac is ordinary asphalt with a red pigment, and often red aggregate, in the surface course, laid on the same sub-base and binder course as a black tarmac drive.

  • Full dig-out and MOT Type 1 sub-base, about 150 mm
  • Black AC 20 binder course, about 50–60 mm
  • Contrasting block or kerb border as edge restraint
  • Colour sample discussed before ordering
  • Falls and drainage set as for any new drive

Ilford: common questions

What approvals apply in Ilford?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Will someone visit before I get a fixed price in Ilford?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What is the price of a red tarmac driveway in Ilford?

As a 2026 guide in Ilford, red tarmac driveway work runs at about £90–£138 per m² including VAT, so a 30 m² drive is roughly £2,950–£4,550. Edging, drainage and a dropped kerb are priced separately where needed.

Do you cover all of Ilford?

We cover Ilford including IG1, E12, IG2, IG3, IG4, IG5, and nearby Barking, Leytonstone, Stratford.

More we do in Ilford

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Ilford.

Free survey for new surfacing

Red tarmac driveways in Ilford: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price