Driveways and paths · Gloucestershire

Red tarmac driveways in Cirencester

For red tarmac driveways in Cirencester, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

CIRENCESTER GUIDE£77–£118 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

What does a red tarmac driveway cost in Cirencester?

Guide prices below are for Cirencester, adjusted for the South West, where surfacing rates run about 3% above our UK midpoint.

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£77–£118 per m²
Example: 30 m² drive£2,550–£3,900
Example: 50 m² drive£3,850–£5,900
Example: 80 m² drive£6,200–£9,500

As a 2026 guide in Cirencester, red tarmac driveway work runs at about £77–£118 per m² including VAT, so a 80 m² drive is roughly £6,200–£9,500. Guide only; the survey confirms a fixed price.

Where we work in and around Cirencester

The key facts for Cirencester. Smaller towns such as Cirencester are surveyed alongside nearby jobs in Gloucestershire.

Postcodes
GL7
Area
Gloucestershire
Nearest towns
Stroud (10 miles), Cheltenham (13 miles), Gloucester (15 miles), Tewkesbury (21 miles)
Pricing
South West, about 3% above our UK midpoint
Kerb approvals
The highway authority

Close to Cirencester: Stroud, Cheltenham, Gloucester, Tewkesbury, Yate.

What is included in a red tarmac driveway?

Pigmented red asphalt on the same full build, often framed with a charcoal block border.

  • Full dig-out and MOT Type 1 sub-base, about 150 mm
  • Black AC 20 binder course, about 50–60 mm
  • Red pigmented surface course, about 20–30 mm
  • Contrasting block or kerb border as edge restraint
  • Colour sample discussed before ordering

Rules that apply in Cirencester

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Questions about red tarmac driveways in Cirencester

Do you work in my part of Cirencester?

We cover Cirencester including GL7, and nearby Stroud, Cheltenham, Gloucester.

What approvals apply in Cirencester?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Will someone visit before I get a fixed price in Cirencester?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How much does a red tarmac driveway cost in Cirencester?

As a 2026 guide in Cirencester, red tarmac driveway work runs at about £77–£118 per m² including VAT, so a 80 m² drive is roughly £6,200–£9,500. Edging, drainage and a dropped kerb are priced separately where needed.

Other work in Cirencester

Ready for a price in Cirencester? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Red tarmac driveways in Cirencester: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price