Driveways and paths · Fife

Red tarmac driveways in Dunfermline

Red tarmac driveways in Dunfermline start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

DUNFERMLINE GUIDE£74–£113 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

How much should I budget in Dunfermline?

Guide prices below are for Dunfermline, adjusted for Scotland, where surfacing rates run about 2% below our UK midpoint.

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£74–£113 per m²
Example: 30 m² drive£2,450–£3,700
Example: 50 m² drive£3,700–£5,650
Example: 80 m² drive£5,900–£9,000

As a 2026 guide in Dunfermline, red tarmac driveway work runs at about £74–£113 per m² including VAT, so a 50 m² drive is roughly £3,700–£5,650. Guide only; the survey confirms a fixed price.

Do I need permission in Dunfermline?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. If the job needs a dropped kerb, the council as roads authority approves it before any work on the footway.

Dunfermline: the local details

The key facts for Dunfermline. Dunfermline sits under a mile from Dunfermline, within our regular Fife cover.

Postcodes
KY12
Area
Fife
Nearest towns
Rosyth (3 miles), Dalgety Bay (5 miles), Cowdenbeath (5 miles), Bo'ness (7 miles)
Pricing
Scotland, about 2% below our UK midpoint
Kerb approvals
The council

Nearby, we work in Rosyth, Dalgety Bay, Cowdenbeath, Bo'ness, Linlithgow.

What is included in a red tarmac driveway?

Red tarmac is ordinary asphalt with a red pigment, and often red aggregate, in the surface course, laid on the same sub-base and binder course as a black tarmac drive.

  • Black AC 20 binder course, about 50–60 mm
  • Red pigmented surface course, about 20–30 mm
  • Contrasting block or kerb border as edge restraint
  • Colour sample discussed before ordering
  • Falls and drainage set as for any new drive

Layer by layer

Surface course20–30 mm red pigmented AC 6Binder course50–60 mm black AC 20Sub-baseabout 150 mm MOT Type 1Edgescharcoal blocks or kerbsINDICATIVE CROSS-SECTION · NOT TO SCALE

Your questions answered

What is the price of a red tarmac driveway in Dunfermline?

As a 2026 guide in Dunfermline, red tarmac driveway work runs at about £74–£113 per m² including VAT, so a 50 m² drive is roughly £3,700–£5,650. Edging, drainage and a dropped kerb are priced separately where needed.

How long will the work take at my Dunfermline property?

Usually 2–4 working days. We book Dunfermline surveys alongside other jobs in Fife, and give you dates once the specification is agreed.

Which Dunfermline postcodes do you cover?

We cover Dunfermline including KY12, and nearby Rosyth, Dalgety Bay, Cowdenbeath.

Are there planning or highway rules in Dunfermline?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.

Also in Dunfermline

Ready for a price in Dunfermline? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Red tarmac driveways in Dunfermline: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price