Driveways and paths · Bedfordshire

Red tarmac driveways in Luton

For red tarmac driveways in Luton, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

LUTON GUIDE£79–£121 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

How much should I budget in Luton?

These Luton guide prices reflect rates in the East of England, about 5% above our UK midpoint.

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£79–£121 per m²
Example: 30 m² drive£2,600–£4,000
Example: 50 m² drive£3,950–£6,050
Example: 80 m² drive£6,300–£9,650

As a 2026 guide in Luton, red tarmac driveway work runs at about £79–£121 per m² including VAT, so a 50 m² drive is roughly £3,950–£6,050. Guide only; the survey confirms a fixed price.

Luton: the local details

The key facts for Luton. Luton is one of the bigger places we cover in Bedfordshire, so survey slots come round regularly.

Postcodes
LU1, LU2, LU3
Area
Bedfordshire
Nearest towns
Dunstable (5 miles), Harpenden (5 miles), Hitchin (7 miles), Hemel Hempstead (9 miles)
Pricing
East of England, about 5% above our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Dunstable, Harpenden, Hitchin, Hemel Hempstead, Stevenage.

The build-up we price

Surface course20–30 mm red pigmented AC 6Binder course50–60 mm black AC 20Sub-baseabout 150 mm MOT Type 1Edgescharcoal blocks or kerbsINDICATIVE CROSS-SECTION · NOT TO SCALE

What the price covers

Red tarmac is ordinary asphalt with a red pigment, and often red aggregate, in the surface course, laid on the same sub-base and binder course as a black tarmac drive.

  • Full dig-out and MOT Type 1 sub-base, about 150 mm
  • Black AC 20 binder course, about 50–60 mm
  • Red pigmented surface course, about 20–30 mm
  • Contrasting block or kerb border as edge restraint
  • Falls and drainage set as for any new drive

Do I need permission in Luton?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Questions about red tarmac driveways in Luton

Do you cover all of Luton?

We cover Luton including LU1, LU2, LU3, and nearby Dunstable, Harpenden, Hitchin.

Red tarmac driveway cost in Luton: what should I budget?

As a 2026 guide in Luton, red tarmac driveway work runs at about £79–£121 per m² including VAT, so a 50 m² drive is roughly £3,950–£6,050. Edging, drainage and a dropped kerb are priced separately where needed.

How quickly can work start in Luton?

Usually 2–4 working days. We book Luton surveys alongside other jobs in Bedfordshire, and give you dates once the specification is agreed.

Can I get a free survey in Luton?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Also in Luton

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Luton.

Free survey for new surfacing

Red tarmac driveways in Luton: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price