Car parks and roads · County Antrim

Private and access road surfacing in Ballyclare

Private and access road surfacing in Ballyclare is priced from a site survey and a written specification: build-up depths, drainage, kerbs and lining itemised so budgets can be signed off.

BALLYCLARE GUIDE£40–£70 per m² ex VAT
Private access road in new tarmac between brick mews houses, typical of private road surfacing work

How much should I budget in Ballyclare?

For Ballyclare, we apply the Northern Ireland rate, about 12% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (ex VAT)
Private or access road, new build£40–£70 per m² (£48–£84 inc VAT)
Private road resurfacing over a sound base£19–£33 per m² (£23–£40 inc VAT)
Example: 150 m² road£6,550–£11,600 (£7,850–£13,900 inc VAT)
Example: 400 m² road£15,850–£28,150 (£19,000–£33,800 inc VAT)
Example: 900 m² road£32,800–£58,300 (£39,350–£69,950 inc VAT)

As a 2026 guide in Ballyclare, private road surfacing work runs at about £40–£70 per m² excluding VAT, so a 150 m² road is roughly £6,550–£11,600. Guide only; the survey confirms a fixed price.

What the price covers

Private road surfacing is the construction or resurfacing of a road that the council does not maintain: shared drives, mews, unadopted estate roads and access roads to farms or business units.

  • Survey of the road, its edges and drainage
  • Option pricing: patch, overlay, inlay or rebuild
  • Surface course laid by paver where access allows
  • Kerbs, channels and gullies
  • Speed humps and markings if wanted

Rules that apply in Ballyclare

Householder permitted development covers houses only. Car parks, yards, flats and business premises follow normal planning rules: resurfacing an existing area on the same footprint is generally fine, while a new car park, a change of use or new drainage may need permission. Check with the planning authority before any new hard area.

Layer by layer

Surface course30–40 mm denseBinder courseabout 60 mmSub-base200–300 mm Type 1, to suit trafficEdgeskerbs or haunched edgingINDICATIVE CROSS-SECTION · NOT TO SCALE

Covering Ballyclare

Ballyclare at a glance. We cover Ballyclare by grouping surveys with nearby County Antrim jobs; Belfast is 11 miles away.

Postcodes
BT39
Area
County Antrim
Nearest towns
Newtownabbey (7 miles), Carrickfergus (8 miles), Antrim (9 miles), Larne (10 miles)
Pricing
Northern Ireland, about 12% below our UK midpoint

The same service is available in Newtownabbey, Carrickfergus, Antrim, Larne, Holywood.

Questions about private road surfacing jobs in Ballyclare

How long does private road surfacing take in Ballyclare?

Usually days rather than weeks; phased to keep access. We book Ballyclare surveys alongside other jobs in County Antrim, and give you dates once the specification is agreed.

Do you cover all of Ballyclare?

We cover Ballyclare including BT39, and nearby Newtownabbey, Carrickfergus, Antrim.

Private road surfacing cost in Ballyclare: what should I budget?

As a 2026 guide in Ballyclare, private road surfacing work runs at about £40–£70 per m² excluding VAT, so a 150 m² road is roughly £6,550–£11,600. Drainage, kerbs and lining are itemised separately.

Will someone visit before I get a fixed price in Ballyclare?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Also in Ballyclare

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Ballyclare.

Free survey for new surfacing

Private and access road surfacing in Ballyclare: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price