Driveways and paths · Merseyside

Permeable tarmac driveways in Haydock

Every permeable tarmac driveway we price in Haydock comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

HAYDOCK GUIDE£78–£121 per m² inc VAT
Porous asphalt driveway draining after rain with no standing water, typical of permeable tarmac driveway work

Permeable tarmac driveway prices in Haydock

Guide prices below are for Haydock, adjusted for the North West, where surfacing rates run about 3% below our UK midpoint.

ItemGuide price (inc VAT)
Porous asphalt drive on a permeable stone base£78–£121 per m²
Example: 30 m² drive£2,550–£4,000
Example: 50 m² drive£3,900–£6,050
Example: 80 m² drive£6,200–£9,700

As a 2026 guide in Haydock, permeable tarmac driveway work runs at about £78–£121 per m² including VAT, so a 50 m² drive is roughly £3,900–£6,050. Guide only; the survey confirms a fixed price.

What the price covers

A permeable tarmac drive uses porous asphalt, a mix with fewer fine particles so water passes through the gaps, laid on an open-graded stone base that stores the rain and lets it soak into the ground.

  • Ground check: how fast does the soil drain?
  • Geotextile separating layer on the formation
  • Open-graded permeable sub-base, often Type 3 or 4/20 stone
  • Porous asphalt binder and surface courses
  • Edge restraint that does not block the flow

The build-up we price

Surface courseporous asphalt, open-gradedBinder courseporous asphalt baseStorage layeropen-graded Type 3 or 4/20 stone, depth to suitFormationgeotextile on the subsoilINDICATIVE CROSS-SECTION · NOT TO SCALE

Haydock: the local details

What applies in Haydock. Haydock is covered on our Merseyside rounds, 13 miles from Liverpool.

Postcodes
WA11
Area
Merseyside
Nearest towns
Ashton-in-Makerfield (2 miles), St Helens (2 miles), Newton-le-Willows (4 miles), Golborne (4 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

Close to Haydock: Ashton-in-Makerfield, St Helens, Newton-le-Willows, Golborne, Great Sankey.

Planning and kerb rules for Haydock

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Your questions answered

Permeable tarmac driveway cost in Haydock: what should I budget?

As a 2026 guide in Haydock, permeable tarmac driveway work runs at about £78–£121 per m² including VAT, so a 50 m² drive is roughly £3,900–£6,050. Edging, drainage and a dropped kerb are priced separately where needed.

How long will the work take at my Haydock property?

Usually 3–5 working days. We book Haydock surveys alongside other jobs in Merseyside, and give you dates once the specification is agreed.

What approvals apply in Haydock?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Can I get a free survey in Haydock?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Haydock

Ready for a price in Haydock? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Permeable tarmac driveways in Haydock: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price