Permeable tarmac driveways in Whitstable

Permeable tarmac driveway prices in Whitstable

Guide prices below are for Whitstable, adjusted for the South East, where surfacing rates run about 10% above our UK midpoint.

Item	Guide price (inc VAT)
Porous asphalt drive on a permeable stone base	£88–£138 per m²
Example: 30 m² drive	£2,900–£4,550
Example: 50 m² drive	£4,400–£6,900
Example: 80 m² drive	£7,050–£11,000

As a 2026 guide in Whitstable, permeable tarmac driveway work runs at about £88–£138 per m² including VAT, so a 30 m² drive is roughly £2,900–£4,550. Guide only; the survey confirms a fixed price.

Whitstable: the local details

Survey cover and pricing for Whitstable. We reach Whitstable on our Kent survey days; Maidstone is 23 miles away.

Postcodes: CT5
Area: Kent
Nearest towns: Herne Bay (5 miles), Canterbury (6 miles), Faversham (7 miles), Sittingbourne (13 miles)
Pricing: South East, about 10% above our UK midpoint
Kerb approvals: The highway authority

The same service is available in Herne Bay, Canterbury, Faversham, Sittingbourne, Margate.

Layer by layer

Planning and kerb rules for Whitstable

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

What we do on a permeable tarmac driveway

A permeable tarmac drive uses porous asphalt, a mix with fewer fine particles so water passes through the gaps, laid on an open-graded stone base that stores the rain and lets it soak into the ground.

Ground check: how fast does the soil drain?
Dig out deeper than a standard drive to fit the storage layer
Geotextile separating layer on the formation
Porous asphalt binder and surface courses
Overflow to a soakaway or border on slow-draining ground

Whitstable: common questions

Permeable tarmac driveway cost in Whitstable: what should I budget?

As a 2026 guide in Whitstable, permeable tarmac driveway work runs at about £88–£138 per m² including VAT, so a 30 m² drive is roughly £2,900–£4,550. Edging, drainage and a dropped kerb are priced separately where needed.

Are there planning or highway rules in Whitstable?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Do you cover all of Whitstable?

We cover Whitstable including CT5, and nearby Herne Bay, Canterbury, Faversham.

Can I get a free survey in Whitstable?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Other work in Whitstable

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Whitstable.