Permeable tarmac driveways in Ashton-under-Lyne
Permeable tarmac driveways in Ashton-under-Lyne start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.
How much should I budget in Ashton-under-Lyne?
For Ashton-under-Lyne, we apply the North West rate, about 3% below our UK midpoint. Your survey turns these ranges into a fixed price.
| Item | Guide price (inc VAT) |
|---|---|
| Porous asphalt drive on a permeable stone base | £78–£121 per m² |
| Example: 30 m² drive | £2,550–£4,000 |
| Example: 50 m² drive | £3,900–£6,050 |
| Example: 80 m² drive | £6,200–£9,700 |
As a 2026 guide in Ashton-under-Lyne, permeable tarmac driveway work runs at about £78–£121 per m² including VAT, so a 50 m² drive is roughly £3,900–£6,050. Guide only; the survey confirms a fixed price.
Covering Ashton-under-Lyne
Ashton-under-Lyne at a glance. Ashton-under-Lyne is 6 miles from Manchester, and we survey there as part of Greater Manchester cover.
- Postcodes
- OL7, OL6
- Area
- Greater Manchester
- Nearest towns
- Dukinfield (1 mile), Stalybridge (2 miles), Droylsden (2 miles), Denton (2 miles)
- Pricing
- North West, about 3% below our UK midpoint
- Kerb approvals
- The highway authority
The same service is available in Dukinfield, Stalybridge, Droylsden, Denton, Hyde.
What we do on a permeable tarmac driveway
A permeable tarmac drive uses porous asphalt, a mix with fewer fine particles so water passes through the gaps, laid on an open-graded stone base that stores the rain and lets it soak into the ground.
- Dig out deeper than a standard drive to fit the storage layer
- Geotextile separating layer on the formation
- Open-graded permeable sub-base, often Type 3 or 4/20 stone
- Porous asphalt binder and surface courses
- Edge restraint that does not block the flow
How it is built
Do I need permission in Ashton-under-Lyne?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).
Your questions answered
How long does a permeable tarmac driveway take in Ashton-under-Lyne?
Usually 3–5 working days. We book Ashton-under-Lyne surveys alongside other jobs in Greater Manchester, and give you dates once the specification is agreed.
Do I need permission for a permeable tarmac driveway in Ashton-under-Lyne?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
Do you cover all of Ashton-under-Lyne?
We cover Ashton-under-Lyne including OL7, OL6, and nearby Dukinfield, Stalybridge, Droylsden.
What is the price of a permeable tarmac driveway in Ashton-under-Lyne?
As a 2026 guide in Ashton-under-Lyne, permeable tarmac driveway work runs at about £78–£121 per m² including VAT, so a 50 m² drive is roughly £3,900–£6,050. Edging, drainage and a dropped kerb are priced separately where needed.
Other work in Ashton-under-Lyne
- Tarmac driveway resurfacing
- Tarmac driveway repairs
- New tarmac driveways
- Private and access road surfacing
- Car park surfacing
- Tar and chip driveways
- Everything in Ashton-under-Lyne
Questions about permeable tarmac driveways in Ashton-under-Lyne? Call, WhatsApp or use the form, and we'll talk it through.
Permeable tarmac driveways in Ashton-under-Lyne: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED