Driveways and paths · West Midlands

New tarmac driveways in Tipton

We survey and price new tarmac driveways across Tipton and the DY4, WV14, DY3 postcodes, with every layer and its depth written into the quote.

TIPTON GUIDE£60–£95 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

New tarmac driveway prices in Tipton

For Tipton, we apply the West Midlands rate, in line with our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£60–£95 per m²
Example: 30 m² drive£2,000–£3,150
Example: 50 m² drive£3,000–£4,750
Example: 80 m² drive£4,800–£7,600

As a 2026 guide in Tipton, new tarmac driveway work runs at about £60–£95 per m² including VAT, so a 50 m² drive is roughly £3,000–£4,750. Guide only; the survey confirms a fixed price.

Layer by layer

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Where we work in and around Tipton

The key facts for Tipton. Tipton sits 8 miles from Birmingham, within our regular West Midlands cover.

Postcodes
DY4, WV14, DY3
Area
West Midlands
Nearest towns
Dudley (2 miles), Wednesbury (2 miles), West Bromwich (3 miles), Willenhall (4 miles)
Pricing
West Midlands, in line with our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Dudley, Wednesbury, West Bromwich, Willenhall, Brierley Hill.

Rules that apply in Tipton

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Break out and remove the old surface and spoil
  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Questions about new tarmac driveways in Tipton

Will someone visit before I get a fixed price in Tipton?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you work in my part of Tipton?

We cover Tipton including DY4, WV14, DY3, and nearby Dudley, Wednesbury, West Bromwich.

How much does a new tarmac driveway cost in Tipton?

As a 2026 guide in Tipton, new tarmac driveway work runs at about £60–£95 per m² including VAT, so a 50 m² drive is roughly £3,000–£4,750. Edging, drainage and a dropped kerb are priced separately where needed.

What approvals apply in Tipton?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

More we do in Tipton

Tell us what you have in mind for Tipton and we'll book a survey and put the specification in writing.

Free survey for new surfacing

New tarmac driveways in Tipton: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price