Driveways and paths · West Glamorgan

New tarmac driveways in Swansea

Every new tarmac driveway we price in Swansea comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

SWANSEA GUIDE£57–£90 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

What does a new tarmac driveway cost in Swansea?

Local guide rates for Swansea (Wales, about 5% below our UK midpoint):

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£57–£90 per m²
Example: 30 m² drive£1,900–£3,000
Example: 50 m² drive£2,850–£4,500
Example: 80 m² drive£4,550–£7,200

As a 2026 guide in Swansea, new tarmac driveway work runs at about £57–£90 per m² including VAT, so a 30 m² drive is roughly £1,900–£3,000. Guide only; the survey confirms a fixed price.

How it is built

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Swansea: the local details

What applies in Swansea. We cover Swansea as part of our regular West Glamorgan rounds.

Postcodes
SA1, SA5, SA2, SA3
Area
West Glamorgan
Nearest towns
Clydach (5 miles), Briton Ferry (5 miles), Gorseinon (5 miles), Neath (7 miles)
Pricing
Wales, about 5% below our UK midpoint
Kerb approvals
The council

We also cover nearby Clydach, Briton Ferry, Gorseinon, Neath, Pontarddulais.

Do I need permission in Swansea?

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. A vehicle crossing over the footway is a separate approval, from the council as highway authority.

What is included in a new tarmac driveway?

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Break out and remove the old surface and spoil
  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

Questions about new tarmac driveways in Swansea

Is the survey in Swansea free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

New tarmac driveway cost in Swansea: what should I budget?

As a 2026 guide in Swansea, new tarmac driveway work runs at about £57–£90 per m² including VAT, so a 30 m² drive is roughly £1,900–£3,000. Edging, drainage and a dropped kerb are priced separately where needed.

How long will the work take at my Swansea property?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Swansea surveys alongside other jobs in West Glamorgan, and give you dates once the specification is agreed.

What approvals apply in Swansea?

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Dropped kerbs are approved by the council as highway authority.

Also in Swansea

Ready for a price in Swansea? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

New tarmac driveways in Swansea: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price