New tarmac driveways in West Molesey
For new tarmac driveways in West Molesey, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

New tarmac driveway prices in West Molesey
These West Molesey guide prices reflect rates in the South East, about 10% above our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| New black tarmac drive, full dig-out and new sub-base | £66–£105 per m² |
| Example: 30 m² drive | £2,200–£3,450 |
| Example: 50 m² drive | £3,300–£5,250 |
| Example: 80 m² drive | £5,300–£8,350 |
As a 2026 guide in West Molesey, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 80 m² drive is roughly £5,300–£8,350. Guide only; the survey confirms a fixed price.
West Molesey: the local details
What applies in West Molesey. West Molesey is covered on our Surrey rounds, 10 miles from Woking.
- Postcodes
- TW12
- Area
- Surrey
- Nearest towns
- East Molesey (1 mile), Sunbury-on-Thames (2 miles), Walton-on-Thames (2 miles), Esher (2 miles)
- Pricing
- South East, about 10% above our UK midpoint
- Kerb approvals
- The highway authority
The same service is available in East Molesey, Sunbury-on-Thames, Walton-on-Thames, Esher, Feltham.
Rules that apply in West Molesey
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).
What we do on a new tarmac driveway
A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.
- Dig to formation level, usually around 230–250 mm below finished height
- MOT Type 1 sub-base laid and compacted in layers, about 150 mm
- Concrete-haunched kerbs or a block-paved border as edge restraint
- Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
- Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
How it is built
West Molesey: common questions
Are there planning or highway rules in West Molesey?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
Will someone visit before I get a fixed price in West Molesey?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
How long will the work take at my West Molesey property?
Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book West Molesey surveys alongside other jobs in Surrey, and give you dates once the specification is agreed.
What is the price of a new tarmac driveway in West Molesey?
As a 2026 guide in West Molesey, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 80 m² drive is roughly £5,300–£8,350. Edging, drainage and a dropped kerb are priced separately where needed.
Also in West Molesey
- Tarmac paths and footpaths
- Car park resurfacing
- Permeable tarmac driveways
- Tarmac driveway repairs
- Tar and chip driveways
- Car park and yard repairs
- Everything in West Molesey
Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for West Molesey.
New tarmac driveways in West Molesey: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED