New tarmac driveways in Tamworth
For new tarmac driveways in Tamworth, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

New tarmac driveway prices in Tamworth
For Tamworth, we apply the West Midlands rate, in line with our UK midpoint. Your survey turns these ranges into a fixed price.
| Item | Guide price (inc VAT) |
|---|---|
| New black tarmac drive, full dig-out and new sub-base | £60–£95 per m² |
| Example: 30 m² drive | £2,000–£3,150 |
| Example: 50 m² drive | £3,000–£4,750 |
| Example: 80 m² drive | £4,800–£7,600 |
As a 2026 guide in Tamworth, new tarmac driveway work runs at about £60–£95 per m² including VAT, so a 80 m² drive is roughly £4,800–£7,600. Guide only; the survey confirms a fixed price.
Where we work in and around Tamworth
The key facts for Tamworth. We cover Tamworth as part of our regular Staffordshire rounds.
- Postcodes
- B79, B77, B78
- Area
- Staffordshire
- Nearest towns
- Lichfield (6 miles), Sutton Coldfield (7 miles), Aldridge (9 miles), Burntwood (10 miles)
- Pricing
- West Midlands, in line with our UK midpoint
- Kerb approvals
- The highway authority
Nearby, we work in Lichfield, Sutton Coldfield, Aldridge, Burntwood, Swadlincote.
Planning and kerb rules for Tamworth
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.
What is included in a new tarmac driveway?
A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.
- Break out and remove the old surface and spoil
- Dig to formation level, usually around 230–250 mm below finished height
- Geotextile membrane where the ground is soft or clay
- MOT Type 1 sub-base laid and compacted in layers, about 150 mm
- Concrete-haunched kerbs or a block-paved border as edge restraint
The build-up we price
Tamworth: common questions
How much does a new tarmac driveway cost in Tamworth?
As a 2026 guide in Tamworth, new tarmac driveway work runs at about £60–£95 per m² including VAT, so a 80 m² drive is roughly £4,800–£7,600. Edging, drainage and a dropped kerb are priced separately where needed.
Can I get a free survey in Tamworth?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
How long does a new tarmac driveway take in Tamworth?
Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Tamworth surveys alongside other jobs in Staffordshire, and give you dates once the specification is agreed.
Are there planning or highway rules in Tamworth?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
Also in Tamworth
- Private and access road surfacing
- Tar and chip driveways
- Tarmac paths and footpaths
- Front garden to tarmac driveway
- Permeable tarmac driveways
- Tarmac driveway resurfacing
- Everything in Tamworth
Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Tamworth.
New tarmac driveways in Tamworth: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED