New tarmac driveways in Barry

New tarmac driveway prices in Barry

For Barry, we apply the Welsh rate, about 5% below our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£57–£90 per m²
Example: 30 m² drive	£1,900–£3,000
Example: 50 m² drive	£2,850–£4,500
Example: 80 m² drive	£4,550–£7,200

As a 2026 guide in Barry, new tarmac driveway work runs at about £57–£90 per m² including VAT, so a 80 m² drive is roughly £4,550–£7,200. Guide only; the survey confirms a fixed price.

Where we work in and around Barry

Survey cover and pricing for Barry. Barry is 7 miles from Cardiff, and we survey there as part of South Glamorgan cover.

Postcodes: CF62, CF63
Area: South Glamorgan
Nearest towns: Dinas Powys (4 miles), Penarth (5 miles), Llandaff (7 miles), Cardiff (7 miles)
Pricing: Wales, about 5% below our UK midpoint
Kerb approvals: The council

We also cover nearby Dinas Powys, Penarth, Llandaff, Cardiff, Llantwit Major.

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
Dig to formation level, usually around 230–250 mm below finished height
Geotextile membrane where the ground is soft or clay
Concrete-haunched kerbs or a block-paved border as edge restraint
Falls set so water runs to a channel, gully or soft landscaping

Rules that apply in Barry

In Wales, a new hard surface in front of a house is permitted development only if it is porous or drains to a permeable area within the property; repairing or replacing up to 5 m² of existing hardstanding is allowed without meeting that condition. Separately, since January 2019, construction covering 100 m² or more that affects drainage generally needs approval from the council's SuDS Approving Body (SAB) before work starts, even where planning permission is not needed. Larger drives, shared surfaces and car parks often reach that threshold. Any new or widened crossing over the pavement needs approval from the council as highway authority.

Layer by layer

Questions about new tarmac driveways in Barry

Are there planning or highway rules in Barry?

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Dropped kerbs are approved by the council as highway authority.

How long will the work take at my Barry property?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Barry surveys alongside other jobs in South Glamorgan, and give you dates once the specification is agreed.

Do you work in my part of Barry?

We cover Barry including CF62, CF63, and nearby Dinas Powys, Penarth, Llandaff.

Will someone visit before I get a fixed price in Barry?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Other work in Barry

Ready for a price in Barry? Use the guide price tool or send the form, and we'll arrange a visit.