New tarmac driveways in Wellingborough

New tarmac driveway prices in Wellingborough

These Wellingborough guide prices reflect rates in the East Midlands, about 2% below our UK midpoint.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£59–£93 per m²
Example: 30 m² drive	£1,950–£3,050
Example: 50 m² drive	£2,950–£4,650
Example: 80 m² drive	£4,700–£7,450

As a 2026 guide in Wellingborough, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Wellingborough

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
Dig to formation level, usually around 230–250 mm below finished height
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Concrete-haunched kerbs or a block-paved border as edge restraint
Falls set so water runs to a channel, gully or soft landscaping

Covering Wellingborough

Survey cover and pricing for Wellingborough. Wellingborough sits 9 miles from Northampton, within our regular Northamptonshire cover.

Postcodes: NN8, NN29
Area: Northamptonshire
Nearest towns: Rushden (4 miles), Kettering (7 miles), Northampton (9 miles), Corby (13 miles)
Pricing: East Midlands, about 2% below our UK midpoint
Kerb approvals: The highway authority

The same service is available in Rushden, Kettering, Northampton, Corby, Daventry.

Wellingborough: common questions

Which Wellingborough postcodes do you cover?

We cover Wellingborough including NN8, NN29, and nearby Rushden, Kettering, Northampton.

What is the price of a new tarmac driveway in Wellingborough?

As a 2026 guide in Wellingborough, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Edging, drainage and a dropped kerb are priced separately where needed.

Can I get a free survey in Wellingborough?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What approvals apply in Wellingborough?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

More we do in Wellingborough

Ready for a price in Wellingborough? Use the guide price tool or send the form, and we'll arrange a visit.