Driveways and paths · North Yorkshire

New tarmac driveways in Redcar

For new tarmac driveways in Redcar, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

REDCAR GUIDE£58–£91 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

What does a new tarmac driveway cost in Redcar?

Local guide rates for Redcar (Yorkshire and the Humber, about 4% below our UK midpoint):

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£58–£91 per m²
Example: 30 m² drive£1,900–£3,000
Example: 50 m² drive£2,900–£4,550
Example: 80 m² drive£4,600–£7,300

As a 2026 guide in Redcar, new tarmac driveway work runs at about £58–£91 per m² including VAT, so a 80 m² drive is roughly £4,600–£7,300. Guide only; the survey confirms a fixed price.

Covering Redcar

Redcar at a glance. Redcar sits 46 miles from York, within our regular North Yorkshire cover.

Postcodes
TS10, TS11
Area
North Yorkshire
Nearest towns
Guisborough (6 miles), Middlesbrough (8 miles), Hartlepool (8 miles), Billingham (9 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Guisborough, Middlesbrough, Hartlepool, Billingham, Stockton-on-Tees.

What is included in a new tarmac driveway?

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Break out and remove the old surface and spoil
  • Dig to formation level, usually around 230–250 mm below finished height
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

Planning and kerb rules for Redcar

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Redcar: common questions

New tarmac driveway cost in Redcar: what should I budget?

As a 2026 guide in Redcar, new tarmac driveway work runs at about £58–£91 per m² including VAT, so a 80 m² drive is roughly £4,600–£7,300. Edging, drainage and a dropped kerb are priced separately where needed.

Are there planning or highway rules in Redcar?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Can I get a free survey in Redcar?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long does a new tarmac driveway take in Redcar?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Redcar surveys alongside other jobs in North Yorkshire, and give you dates once the specification is agreed.

More we do in Redcar

Ready for a price in Redcar? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

New tarmac driveways in Redcar: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price