New tarmac driveways in Tonypandy

What does a new tarmac driveway cost in Tonypandy?

Local guide rates for Tonypandy (Wales, about 5% below our UK midpoint):

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£57–£90 per m²
Example: 30 m² drive	£1,900–£3,000
Example: 50 m² drive	£2,850–£4,500
Example: 80 m² drive	£4,550–£7,200

As a 2026 guide in Tonypandy, new tarmac driveway work runs at about £57–£90 per m² including VAT, so a 30 m² drive is roughly £1,900–£3,000. Guide only; the survey confirms a fixed price.

Where we work in and around Tonypandy

What applies in Tonypandy. Tonypandy is 3 miles from Rhondda, and we survey there as part of Mid Glamorgan cover.

Postcodes: CF40
Area: Mid Glamorgan
Nearest towns: Rhondda (3 miles), Tonyrefail (3 miles), Pontypridd (5 miles), Mountain Ash (5 miles)
Pricing: Wales, about 5% below our UK midpoint
Kerb approvals: The council

We also cover nearby Rhondda, Tonyrefail, Pontypridd, Mountain Ash, Aberdare.

Rules that apply in Tonypandy

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. A vehicle crossing over the footway is a separate approval, from the council as highway authority.

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Dig to formation level, usually around 230–250 mm below finished height
Geotextile membrane where the ground is soft or clay
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Your questions answered

How long does a new tarmac driveway take in Tonypandy?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Tonypandy surveys alongside other jobs in Mid Glamorgan, and give you dates once the specification is agreed.

Do you work in my part of Tonypandy?

We cover Tonypandy including CF40, and nearby Rhondda, Tonyrefail, Pontypridd.

What approvals apply in Tonypandy?

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Dropped kerbs are approved by the council as highway authority.

Can I get a free survey in Tonypandy?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Also in Tonypandy

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Tonypandy.