New tarmac driveways in Wallasey

How much should I budget in Wallasey?

Guide prices below are for Wallasey, adjusted for the North West, where surfacing rates run about 3% below our UK midpoint.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£58–£92 per m²
Example: 30 m² drive	£1,900–£3,050
Example: 50 m² drive	£2,900–£4,600
Example: 80 m² drive	£4,650–£7,350

As a 2026 guide in Wallasey, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 30 m² drive is roughly £1,900–£3,050. Guide only; the survey confirms a fixed price.

What we do on a new tarmac driveway

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

Break out and remove the old surface and spoil
Dig to formation level, usually around 230–250 mm below finished height
Geotextile membrane where the ground is soft or clay
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled

Do I need permission in Wallasey?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Covering Wallasey

Survey cover and pricing for Wallasey. Wallasey is 4 miles from Liverpool, and we survey there as part of Merseyside cover.

Postcodes: CH45, CH44
Area: Merseyside
Nearest towns: Moreton (3 miles), Birkenhead (3 miles), Bootle (4 miles), Liverpool (4 miles)
Pricing: North West, about 3% below our UK midpoint
Kerb approvals: The highway authority

Nearby, we work in Moreton, Birkenhead, Bootle, Liverpool, Litherland.

Questions about new tarmac driveways in Wallasey

Do you work in my part of Wallasey?

We cover Wallasey including CH45, CH44, and nearby Moreton, Birkenhead, Bootle.

How much does a new tarmac driveway cost in Wallasey?

As a 2026 guide in Wallasey, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 30 m² drive is roughly £1,900–£3,050. Edging, drainage and a dropped kerb are priced separately where needed.

Do I need permission for a new tarmac driveway in Wallasey?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Will someone visit before I get a fixed price in Wallasey?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Other work in Wallasey

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Wallasey.