New tarmac driveways in Blackburn

New tarmac driveway prices in Blackburn

Local guide rates for Blackburn (the North West, about 3% below our UK midpoint):

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£58–£92 per m²
Example: 30 m² drive	£1,900–£3,050
Example: 50 m² drive	£2,900–£4,600
Example: 80 m² drive	£4,650–£7,350

As a 2026 guide in Blackburn, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 50 m² drive is roughly £2,900–£4,600. Guide only; the survey confirms a fixed price.

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Concrete-haunched kerbs or a block-paved border as edge restraint
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
Falls set so water runs to a channel, gully or soft landscaping

Where we work in and around Blackburn

What applies in Blackburn. Blackburn is one of the bigger places we cover in Lancashire, so survey slots come round regularly.

Postcodes: BB1, BB2
Area: Lancashire
Nearest towns: Darwen (4 miles), Accrington (5 miles), Haslingden (7 miles), Chorley (9 miles)
Pricing: North West, about 3% below our UK midpoint
Kerb approvals: The highway authority

Close to Blackburn: Darwen, Accrington, Haslingden, Chorley, Rawtenstall.

Planning and kerb rules for Blackburn

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Questions about new tarmac driveways in Blackburn

Are there planning or highway rules in Blackburn?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How quickly can work start in Blackburn?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Blackburn surveys alongside other jobs in Lancashire, and give you dates once the specification is agreed.

Do you cover all of Blackburn?

We cover Blackburn including BB1, BB2, and nearby Darwen, Accrington, Haslingden.

New tarmac driveway cost in Blackburn: what should I budget?

As a 2026 guide in Blackburn, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 50 m² drive is roughly £2,900–£4,600. Edging, drainage and a dropped kerb are priced separately where needed.

Also in Blackburn

Tell us what you have in mind for Blackburn and we'll book a survey and put the specification in writing.