New tarmac driveways in Ashford, Kent

How much should I budget in Ashford, Kent?

Local guide rates for Ashford, Kent (the South East, about 10% above our UK midpoint):

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£66–£105 per m²
Example: 30 m² drive	£2,200–£3,450
Example: 50 m² drive	£3,300–£5,250
Example: 80 m² drive	£5,300–£8,350

As a 2026 guide in Ashford, Kent, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 30 m² drive is roughly £2,200–£3,450. Guide only; the survey confirms a fixed price.

Rules that apply in Ashford, Kent

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
Geotextile membrane where the ground is soft or clay
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Concrete-haunched kerbs or a block-paved border as edge restraint
Falls set so water runs to a channel, gully or soft landscaping

Where we work in and around Ashford, Kent

What applies in Ashford, Kent. We reach Ashford, Kent on our Kent survey days; Maidstone is 18 miles away.

Postcodes: TN24, TN23, TN25, TN26
Area: Kent
Nearest towns: Faversham (12 miles), Canterbury (13 miles), Folkestone (13 miles), Sittingbourne (15 miles)
Pricing: South East, about 10% above our UK midpoint
Kerb approvals: The highway authority

Close to Ashford, Kent: Faversham, Canterbury, Folkestone, Sittingbourne, Whitstable.

Your questions answered

Do I need permission for a new tarmac driveway in Ashford, Kent?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long will the work take at my Ashford, Kent property?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Ashford, Kent surveys alongside other jobs in Kent, and give you dates once the specification is agreed.

New tarmac driveway cost in Ashford, Kent: what should I budget?

As a 2026 guide in Ashford, Kent, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 30 m² drive is roughly £2,200–£3,450. Edging, drainage and a dropped kerb are priced separately where needed.

Will someone visit before I get a fixed price in Ashford, Kent?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Ashford, Kent

Questions about new tarmac driveways in Ashford, Kent? Call, WhatsApp or use the form, and we'll talk it through.