Driveways and paths · Hertfordshire

New tarmac driveways in Borehamwood

New tarmac driveways in Borehamwood start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

BOREHAMWOOD GUIDE£63–£100 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

New tarmac driveway prices in Borehamwood

For Borehamwood, we apply the East of England rate, about 5% above our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£63–£100 per m²
Example: 30 m² drive£2,100–£3,300
Example: 50 m² drive£3,150–£5,000
Example: 80 m² drive£5,050–£8,000

As a 2026 guide in Borehamwood, new tarmac driveway work runs at about £63–£100 per m² including VAT, so a 50 m² drive is roughly £3,150–£5,000. Guide only; the survey confirms a fixed price.

Borehamwood: the local details

The key facts for Borehamwood. We reach Borehamwood on our Hertfordshire survey days; Watford is 5 miles away.

Postcodes
WD6, WD7, HA8
Area
Hertfordshire
Nearest towns
Barnet (3 miles), Bushey (4 miles), Potters Bar (5 miles), Watford (5 miles)
Pricing
East of England, about 5% above our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Barnet, Bushey, Potters Bar, Watford, Finchley.

Planning and kerb rules for Borehamwood

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

What the price covers

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Break out and remove the old surface and spoil
  • Geotextile membrane where the ground is soft or clay
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Layer by layer

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Questions about new tarmac driveways in Borehamwood

Will someone visit before I get a fixed price in Borehamwood?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you cover all of Borehamwood?

We cover Borehamwood including WD6, WD7, HA8, and nearby Barnet, Bushey, Potters Bar.

How long will the work take at my Borehamwood property?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Borehamwood surveys alongside other jobs in Hertfordshire, and give you dates once the specification is agreed.

Are there planning or highway rules in Borehamwood?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Also in Borehamwood

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Borehamwood.

Free survey for new surfacing

New tarmac driveways in Borehamwood: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price