Driveways and paths · Hampshire

New tarmac driveways in Hythe

We survey and price new tarmac driveways across Hythe and the SO45 postcodes, with every layer and its depth written into the quote.

HYTHE GUIDE£66–£105 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

What does a new tarmac driveway cost in Hythe?

Guide prices below are for Hythe, adjusted for the South East, where surfacing rates run about 10% above our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£66–£105 per m²
Example: 30 m² drive£2,200–£3,450
Example: 50 m² drive£3,300–£5,250
Example: 80 m² drive£5,300–£8,350

As a 2026 guide in Hythe, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 30 m² drive is roughly £2,200–£3,450. Guide only; the survey confirms a fixed price.

Where we work in and around Hythe

What applies in Hythe. Hythe is covered on our Hampshire rounds, 3 miles from Southampton.

Postcodes
SO45
Area
Hampshire
Nearest towns
Southampton (3 miles), Totton (6 miles), Hedge End (6 miles), Eastleigh (8 miles)
Pricing
South East, about 10% above our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Southampton, Totton, Hedge End, Eastleigh, Bishopstoke.

What we do on a new tarmac driveway

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Falls set so water runs to a channel, gully or soft landscaping

Do I need permission in Hythe?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Layer by layer

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Questions about new tarmac driveways in Hythe

How much does a new tarmac driveway cost in Hythe?

As a 2026 guide in Hythe, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 30 m² drive is roughly £2,200–£3,450. Edging, drainage and a dropped kerb are priced separately where needed.

Will someone visit before I get a fixed price in Hythe?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do I need permission for a new tarmac driveway in Hythe?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long does a new tarmac driveway take in Hythe?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Hythe surveys alongside other jobs in Hampshire, and give you dates once the specification is agreed.

Also in Hythe

Tell us what you have in mind for Hythe and we'll book a survey and put the specification in writing.

Free survey for new surfacing

New tarmac driveways in Hythe: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price