Driveways and paths · Hampshire

New tarmac driveways in Gosport

A good new tarmac driveway in Gosport looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

GOSPORT GUIDE£66–£105 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in Gosport?

Local guide rates for Gosport (the South East, about 10% above our UK midpoint):

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£66–£105 per m²
Example: 30 m² drive£2,200–£3,450
Example: 50 m² drive£3,300–£5,250
Example: 80 m² drive£5,300–£8,350

As a 2026 guide in Gosport, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 50 m² drive is roughly £3,300–£5,250. Guide only; the survey confirms a fixed price.

Do I need permission in Gosport?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Break out and remove the old surface and spoil
  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled

Gosport: the local details

Survey cover and pricing for Gosport. We cover Gosport as part of our regular Hampshire rounds.

Postcodes
PO12, PO13
Area
Hampshire
Nearest towns
Portsmouth (2 miles), Fareham (4 miles), Hayling Island (7 miles), Waterlooville (7 miles)
Pricing
South East, about 10% above our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Portsmouth, Fareham, Hayling Island, Waterlooville, Havant.

Questions about new tarmac driveways in Gosport

Is the survey in Gosport free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

New tarmac driveway cost in Gosport: what should I budget?

As a 2026 guide in Gosport, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 50 m² drive is roughly £3,300–£5,250. Edging, drainage and a dropped kerb are priced separately where needed.

How long will the work take at my Gosport property?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Gosport surveys alongside other jobs in Hampshire, and give you dates once the specification is agreed.

Do I need permission for a new tarmac driveway in Gosport?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

More we do in Gosport

Tell us what you have in mind for Gosport and we'll book a survey and put the specification in writing.

Free survey for new surfacing

New tarmac driveways in Gosport: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price