Driveways and paths · Gwynedd

New tarmac driveways in Holyhead

New tarmac driveways in Holyhead start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

HOLYHEAD GUIDE£57–£90 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in Holyhead?

Guide prices below are for Holyhead, adjusted for Wales, where surfacing rates run about 5% below our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£57–£90 per m²
Example: 30 m² drive£1,900–£3,000
Example: 50 m² drive£2,850–£4,500
Example: 80 m² drive£4,550–£7,200

As a 2026 guide in Holyhead, new tarmac driveway work runs at about £57–£90 per m² including VAT, so a 80 m² drive is roughly £4,550–£7,200. Guide only; the survey confirms a fixed price.

Rules that apply in Holyhead

In Wales, a new hard surface in front of a house is permitted development only if it is porous or drains to a permeable area within the property; repairing or replacing up to 5 m² of existing hardstanding is allowed without meeting that condition. Separately, since January 2019, construction covering 100 m² or more that affects drainage generally needs approval from the council's SuDS Approving Body (SAB) before work starts, even where planning permission is not needed. Larger drives, shared surfaces and car parks often reach that threshold. Any new or widened crossing over the pavement needs approval from the council as highway authority.

Holyhead: the local details

Holyhead at a glance. Holyhead is covered on our Gwynedd rounds, 21 miles from Bangor, Gwynedd.

Postcodes
LL65
Area
Gwynedd
Nearest towns
Caernarfon (19 miles), Bangor (Gwynedd) (21 miles)
Pricing
Wales, about 5% below our UK midpoint
Kerb approvals
The council

Nearby, we work in Caernarfon, Bangor (Gwynedd).

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Falls set so water runs to a channel, gully or soft landscaping

How it is built

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Questions about new tarmac driveways in Holyhead

What approvals apply in Holyhead?

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Dropped kerbs are approved by the council as highway authority.

New tarmac driveway cost in Holyhead: what should I budget?

As a 2026 guide in Holyhead, new tarmac driveway work runs at about £57–£90 per m² including VAT, so a 80 m² drive is roughly £4,550–£7,200. Edging, drainage and a dropped kerb are priced separately where needed.

Is the survey in Holyhead free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Which Holyhead postcodes do you cover?

We cover Holyhead including LL65, and nearby Caernarfon, Bangor (Gwynedd).

Also in Holyhead

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Holyhead.

Free survey for new surfacing

New tarmac driveways in Holyhead: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price