Driveways and paths · Greater Manchester

New tarmac driveways in Hindley

If you are weighing up new tarmac driveways in Hindley, the useful questions are about depth, edges and drainage. That's what our survey checks and what your quote spells out.

HINDLEY GUIDE£58–£92 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

What does a new tarmac driveway cost in Hindley?

For Hindley, we apply the North West rate, about 3% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£58–£92 per m²
Example: 30 m² drive£1,900–£3,050
Example: 50 m² drive£2,900–£4,600
Example: 80 m² drive£4,650–£7,350

As a 2026 guide in Hindley, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 80 m² drive is roughly £4,650–£7,350. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Hindley

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Break out and remove the old surface and spoil
  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Covering Hindley

Survey cover and pricing for Hindley. Smaller towns such as Hindley are surveyed alongside nearby jobs in Greater Manchester.

Postcodes
WN2
Area
Greater Manchester
Nearest towns
Wigan (2 miles), Westhoughton (3 miles), Leigh (4 miles), Atherton (4 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Wigan, Westhoughton, Leigh, Atherton, Golborne.

How it is built

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Questions about new tarmac driveways in Hindley

Which Hindley postcodes do you cover?

We cover Hindley including WN2, and nearby Wigan, Westhoughton, Leigh.

Do I need permission for a new tarmac driveway in Hindley?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long does a new tarmac driveway take in Hindley?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Hindley surveys alongside other jobs in Greater Manchester, and give you dates once the specification is agreed.

Can I get a free survey in Hindley?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Also in Hindley

Tell us what you have in mind for Hindley and we'll book a survey and put the specification in writing.

Free survey for new surfacing

New tarmac driveways in Hindley: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price