Driveways and paths · Greater London

New tarmac driveways in Holloway

Planning a new tarmac driveway in Holloway? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

HOLLOWAY GUIDE£72–£114 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

New tarmac driveway prices in Holloway

Guide prices below are for Holloway, adjusted for London, where surfacing rates run about 20% above our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£72–£114 per m²
Example: 30 m² drive£2,400–£3,750
Example: 50 m² drive£3,600–£5,700
Example: 80 m² drive£5,750–£9,100

As a 2026 guide in Holloway, new tarmac driveway work runs at about £72–£114 per m² including VAT, so a 80 m² drive is roughly £5,750–£9,100. Guide only; the survey confirms a fixed price.

How it is built

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Break out and remove the old surface and spoil
  • Geotextile membrane where the ground is soft or clay
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled

Rules that apply in Holloway

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Holloway: the local details

Survey cover and pricing for Holloway. Holloway is one of the bigger places we cover in Greater London, so survey slots come round regularly.

Postcodes
N7, N19
Area
Greater London
Nearest towns
Highbury (1 mile), Camden Town (1 mile), Islington (1 mile), Muswell Hill (3 miles)
Pricing
London, about 20% above our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Highbury, Camden Town, Islington, Muswell Hill, Kilburn.

Questions about new tarmac driveways in Holloway

How long will the work take at my Holloway property?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Holloway surveys alongside other jobs in Greater London, and give you dates once the specification is agreed.

Do you work in my part of Holloway?

We cover Holloway including N7, N19, and nearby Highbury, Camden Town, Islington.

What approvals apply in Holloway?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Can I get a free survey in Holloway?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Also in Holloway

Questions about new tarmac driveways in Holloway? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

New tarmac driveways in Holloway: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price