New tarmac driveways in Dunblane

How much should I budget in Dunblane?

Local guide rates for Dunblane (Scotland, about 2% below our UK midpoint):

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£59–£93 per m²
Example: 30 m² drive	£1,950–£3,050
Example: 50 m² drive	£2,950–£4,650
Example: 80 m² drive	£4,700–£7,450

As a 2026 guide in Dunblane, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Guide only; the survey confirms a fixed price.

Rules that apply in Dunblane

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. A vehicle crossing over the footway is a separate approval, from the council as roads authority.

Covering Dunblane

Survey cover and pricing for Dunblane. We cover Dunblane by grouping surveys with nearby Forth Valley jobs; Stirling is 5 miles away.

Postcodes: FK15, FK16
Area: Forth Valley
Nearest towns: Stirling (5 miles), Alloa (8 miles), Stenhousemuir (13 miles), Larbert (13 miles)
Pricing: Scotland, about 2% below our UK midpoint
Kerb approvals: The council

We also cover nearby Stirling, Alloa, Stenhousemuir, Larbert, Falkirk.

The build-up we price

What is included in a new tarmac driveway?

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
Dig to formation level, usually around 230–250 mm below finished height
Geotextile membrane where the ground is soft or clay
Concrete-haunched kerbs or a block-paved border as edge restraint
Falls set so water runs to a channel, gully or soft landscaping

Questions about new tarmac driveways in Dunblane

What approvals apply in Dunblane?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.

New tarmac driveway cost in Dunblane: what should I budget?

As a 2026 guide in Dunblane, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Edging, drainage and a dropped kerb are priced separately where needed.

How long does a new tarmac driveway take in Dunblane?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Dunblane surveys alongside other jobs in the Forth Valley, and give you dates once the specification is agreed.

Can I get a free survey in Dunblane?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Also in Dunblane

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Dunblane.