New tarmac driveways in Bathgate
For new tarmac driveways in Bathgate, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

New tarmac driveway prices in Bathgate
Local guide rates for Bathgate (Scotland, about 2% below our UK midpoint):
| Item | Guide price (inc VAT) |
|---|---|
| New black tarmac drive, full dig-out and new sub-base | £59–£93 per m² |
| Example: 30 m² drive | £1,950–£3,050 |
| Example: 50 m² drive | £2,950–£4,650 |
| Example: 80 m² drive | £4,700–£7,450 |
As a 2026 guide in Bathgate, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Guide only; the survey confirms a fixed price.
Covering Bathgate
What applies in Bathgate. We cover Bathgate by grouping surveys with nearby Edinburgh and the Lothians jobs; Edinburgh is 18 miles away.
- Postcodes
- EH48
- Area
- Edinburgh and the Lothians
- Nearest towns
- Armadale (3 miles), Whitburn (3 miles), Livingston (5 miles), Linlithgow (5 miles)
- Pricing
- Scotland, about 2% below our UK midpoint
- Kerb approvals
- The council
Close to Bathgate: Armadale, Whitburn, Livingston, Linlithgow, Broxburn.
What we do on a new tarmac driveway
A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.
- Dig to formation level, usually around 230–250 mm below finished height
- Geotextile membrane where the ground is soft or clay
- Concrete-haunched kerbs or a block-paved border as edge restraint
- Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
- Falls set so water runs to a channel, gully or soft landscaping
Planning and kerb rules for Bathgate
In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.
Questions about new tarmac driveways in Bathgate
How long does a new tarmac driveway take in Bathgate?
Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Bathgate surveys alongside other jobs in Edinburgh and the Lothians, and give you dates once the specification is agreed.
New tarmac driveway cost in Bathgate: what should I budget?
As a 2026 guide in Bathgate, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Edging, drainage and a dropped kerb are priced separately where needed.
Is the survey in Bathgate free?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
Which Bathgate postcodes do you cover?
We cover Bathgate including EH48, and nearby Armadale, Whitburn, Livingston.
Other work in Bathgate
- Tar and chip driveways
- Red tarmac driveways
- Permeable tarmac driveways
- Car park and yard repairs
- Private and access road surfacing
- Front garden to tarmac driveway
- Everything in Bathgate
Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Bathgate.
New tarmac driveways in Bathgate: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED