Driveways and paths · East Riding of Yorkshire

New tarmac driveways in Goole

Planning a new tarmac driveway in Goole? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

GOOLE GUIDE£58–£91 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

What does a new tarmac driveway cost in Goole?

These Goole guide prices reflect rates in Yorkshire and the Humber, about 4% below our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£58–£91 per m²
Example: 30 m² drive£1,900–£3,000
Example: 50 m² drive£2,900–£4,550
Example: 80 m² drive£4,600–£7,300

As a 2026 guide in Goole, new tarmac driveway work runs at about £58–£91 per m² including VAT, so a 80 m² drive is roughly £4,600–£7,300. Guide only; the survey confirms a fixed price.

Where we work in and around Goole

Goole at a glance. Smaller towns such as Goole are surveyed alongside nearby jobs in the East Riding of Yorkshire.

Postcodes
DN14
Area
East Riding of Yorkshire
Nearest towns
Thorne (7 miles), Selby (10 miles), Brough (13 miles), Beverley (21 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Thorne, Selby, Brough, Beverley, Kingston upon Hull.

Do I need permission in Goole?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

What the price covers

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Break out and remove the old surface and spoil
  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled

How it is built

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Goole: common questions

How long will the work take at my Goole property?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Goole surveys alongside other jobs in the East Riding of Yorkshire, and give you dates once the specification is agreed.

New tarmac driveway cost in Goole: what should I budget?

As a 2026 guide in Goole, new tarmac driveway work runs at about £58–£91 per m² including VAT, so a 80 m² drive is roughly £4,600–£7,300. Edging, drainage and a dropped kerb are priced separately where needed.

Do you work in my part of Goole?

We cover Goole including DN14, and nearby Thorne, Selby, Brough.

Will someone visit before I get a fixed price in Goole?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Goole

Ready for a price in Goole? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

New tarmac driveways in Goole: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price