Driveways and paths · Devon

New tarmac driveways in Plymstock

We survey and price new tarmac driveways across Plymstock and the PL9, PL7, PL8 postcodes, with every layer and its depth written into the quote.

PLYMSTOCK GUIDE£62–£98 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

What does a new tarmac driveway cost in Plymstock?

Guide prices below are for Plymstock, adjusted for the South West, where surfacing rates run about 3% above our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£62–£98 per m²
Example: 30 m² drive£2,050–£3,250
Example: 50 m² drive£3,100–£4,900
Example: 80 m² drive£4,950–£7,850

As a 2026 guide in Plymstock, new tarmac driveway work runs at about £62–£98 per m² including VAT, so a 80 m² drive is roughly £4,950–£7,850. Guide only; the survey confirms a fixed price.

Rules that apply in Plymstock

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

What is included in a new tarmac driveway?

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Dig to formation level, usually around 230–250 mm below finished height
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

How it is built

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Where we work in and around Plymstock

What applies in Plymstock. Plymstock is covered on our Devon rounds, 2 miles from Plymouth.

Postcodes
PL9, PL7, PL8
Area
Devon
Nearest towns
Plymouth (2 miles), Saltash (7 miles), Paignton (24 miles), Newton Abbot (24 miles)
Pricing
South West, about 3% above our UK midpoint
Kerb approvals
The highway authority

Close to Plymstock: Plymouth, Saltash, Paignton, Newton Abbot.

Questions about new tarmac driveways in Plymstock

How much does a new tarmac driveway cost in Plymstock?

As a 2026 guide in Plymstock, new tarmac driveway work runs at about £62–£98 per m² including VAT, so a 80 m² drive is roughly £4,950–£7,850. Edging, drainage and a dropped kerb are priced separately where needed.

Is the survey in Plymstock free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What approvals apply in Plymstock?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Do you work in my part of Plymstock?

We cover Plymstock including PL9, PL7, PL8, and nearby Plymouth, Saltash, Paignton.

More we do in Plymstock

Questions about new tarmac driveways in Plymstock? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

New tarmac driveways in Plymstock: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price