Driveways and paths · Derbyshire

New tarmac driveways in Alfreton

A good new tarmac driveway in Alfreton looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

ALFRETON GUIDE£59–£93 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in Alfreton?

Guide prices below are for Alfreton, adjusted for the East Midlands, where surfacing rates run about 2% below our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£59–£93 per m²
Example: 30 m² drive£1,950–£3,050
Example: 50 m² drive£2,950–£4,650
Example: 80 m² drive£4,700–£7,450

As a 2026 guide in Alfreton, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 30 m² drive is roughly £1,950–£3,050. Guide only; the survey confirms a fixed price.

What we do on a new tarmac driveway

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Break out and remove the old surface and spoil
  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled

Covering Alfreton

Survey cover and pricing for Alfreton. We cover Alfreton by grouping surveys with nearby Derbyshire jobs; Derby is 13 miles away.

Postcodes
DE55, S45
Area
Derbyshire
Nearest towns
Ripley (5 miles), Sutton-in-Ashfield (5 miles), Kirkby-in-Ashfield (6 miles), Heanor (6 miles)
Pricing
East Midlands, about 2% below our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Ripley, Sutton-in-Ashfield, Kirkby-in-Ashfield, Heanor, Belper.

Planning and kerb rules for Alfreton

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Your questions answered

Which Alfreton postcodes do you cover?

We cover Alfreton including DE55, S45, and nearby Ripley, Sutton-in-Ashfield, Kirkby-in-Ashfield.

New tarmac driveway cost in Alfreton: what should I budget?

As a 2026 guide in Alfreton, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 30 m² drive is roughly £1,950–£3,050. Edging, drainage and a dropped kerb are priced separately where needed.

What approvals apply in Alfreton?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long does a new tarmac driveway take in Alfreton?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Alfreton surveys alongside other jobs in Derbyshire, and give you dates once the specification is agreed.

Also in Alfreton

Ready for a price in Alfreton? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

New tarmac driveways in Alfreton: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price