Driveways and paths · Cumbria

New tarmac driveways in Workington

Every new tarmac driveway we price in Workington comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

WORKINGTON GUIDE£58–£92 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

What does a new tarmac driveway cost in Workington?

These Workington guide prices reflect rates in the North West, about 3% below our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£58–£92 per m²
Example: 30 m² drive£1,900–£3,050
Example: 50 m² drive£2,900–£4,600
Example: 80 m² drive£4,650–£7,350

As a 2026 guide in Workington, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 80 m² drive is roughly £4,650–£7,350. Guide only; the survey confirms a fixed price.

Layer by layer

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Workington: the local details

The key facts for Workington. We cover Workington by grouping surveys with nearby Cumbria jobs; Carlisle is 30 miles away.

Postcodes
CA14, CA15
Area
Cumbria
Nearest towns
Whitehaven (7 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

Close to Workington: Whitehaven.

What the price covers

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Break out and remove the old surface and spoil
  • Dig to formation level, usually around 230–250 mm below finished height
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

Do I need permission in Workington?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Questions about new tarmac driveways in Workington

Do you cover all of Workington?

We cover Workington including CA14, CA15, and nearby Whitehaven.

What approvals apply in Workington?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long does a new tarmac driveway take in Workington?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Workington surveys alongside other jobs in Cumbria, and give you dates once the specification is agreed.

What is the price of a new tarmac driveway in Workington?

As a 2026 guide in Workington, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 80 m² drive is roughly £4,650–£7,350. Edging, drainage and a dropped kerb are priced separately where needed.

More we do in Workington

Ready for a price in Workington? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

New tarmac driveways in Workington: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price