Driveways and paths · Cumbria

New tarmac driveways in Penrith

Every new tarmac driveway we price in Penrith comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

PENRITH GUIDE£58–£92 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in Penrith?

For Penrith, we apply the North West rate, about 3% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£58–£92 per m²
Example: 30 m² drive£1,900–£3,050
Example: 50 m² drive£2,900–£4,600
Example: 80 m² drive£4,650–£7,350

As a 2026 guide in Penrith, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 30 m² drive is roughly £1,900–£3,050. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Penrith

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Layer by layer

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Where we work in and around Penrith

Survey cover and pricing for Penrith. Smaller towns such as Penrith are surveyed alongside nearby jobs in Cumbria.

Postcodes
CA11, CA10
Area
Cumbria
Nearest towns
Carlisle (17 miles), Kendal (23 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Carlisle, Kendal.

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Break out and remove the old surface and spoil
  • Dig to formation level, usually around 230–250 mm below finished height
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Questions about new tarmac driveways in Penrith

How quickly can work start in Penrith?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Penrith surveys alongside other jobs in Cumbria, and give you dates once the specification is agreed.

Are there planning or highway rules in Penrith?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Can I get a free survey in Penrith?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How much does a new tarmac driveway cost in Penrith?

As a 2026 guide in Penrith, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 30 m² drive is roughly £1,900–£3,050. Edging, drainage and a dropped kerb are priced separately where needed.

Also in Penrith

Ready for a price in Penrith? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

New tarmac driveways in Penrith: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price