Driveways and paths · County Londonderry

New tarmac driveways in Portrush

A good new tarmac driveway in Portrush looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

PORTRUSH GUIDE£53–£84 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

New tarmac driveway prices in Portrush

Guide prices below are for Portrush, adjusted for Northern Ireland, where surfacing rates run about 12% below our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£53–£84 per m²
Example: 30 m² drive£1,750–£2,750
Example: 50 m² drive£2,650–£4,200
Example: 80 m² drive£4,200–£6,700

As a 2026 guide in Portrush, new tarmac driveway work runs at about £53–£84 per m² including VAT, so a 80 m² drive is roughly £4,200–£6,700. Guide only; the survey confirms a fixed price.

Rules that apply in Portrush

In Northern Ireland, more than 5 m² of hard surface in front of a house should be porous or drain to a porous area within the property; DfI Roads approves dropped kerbs. Any new or widened crossing over the pavement needs approval from DfI Roads.

Where we work in and around Portrush

Portrush at a glance. We cover Portrush by grouping surveys with nearby County Londonderry jobs; Derry is 29 miles away.

Postcodes
BT56, BT57
Area
County Londonderry
Nearest towns
Portstewart (3 miles), Coleraine (4 miles), Ballymoney (10 miles), Limavady (16 miles)
Pricing
Northern Ireland, about 12% below our UK midpoint
Kerb approvals
DfI Roads

Close to Portrush: Portstewart, Coleraine, Ballymoney, Limavady.

Layer by layer

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

What the price covers

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Break out and remove the old surface and spoil
  • Dig to formation level, usually around 230–250 mm below finished height
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Falls set so water runs to a channel, gully or soft landscaping

Questions about new tarmac driveways in Portrush

Will someone visit before I get a fixed price in Portrush?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What is the price of a new tarmac driveway in Portrush?

As a 2026 guide in Portrush, new tarmac driveway work runs at about £53–£84 per m² including VAT, so a 80 m² drive is roughly £4,200–£6,700. Edging, drainage and a dropped kerb are priced separately where needed.

Which Portrush postcodes do you cover?

We cover Portrush including BT56, BT57, and nearby Portstewart, Coleraine, Ballymoney.

How quickly can work start in Portrush?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Portrush surveys alongside other jobs in County Londonderry, and give you dates once the specification is agreed.

Also in Portrush

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Portrush.

Free survey for new surfacing

New tarmac driveways in Portrush: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price