Driveways and paths · County Durham

New tarmac driveways in Spennymoor

A good new tarmac driveway in Spennymoor looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

SPENNYMOOR GUIDE£56–£88 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

New tarmac driveway prices in Spennymoor

Local guide rates for Spennymoor (the North East, about 7% below our UK midpoint):

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£56–£88 per m²
Example: 30 m² drive£1,850–£2,900
Example: 50 m² drive£2,800–£4,400
Example: 80 m² drive£4,450–£7,050

As a 2026 guide in Spennymoor, new tarmac driveway work runs at about £56–£88 per m² including VAT, so a 80 m² drive is roughly £4,450–£7,050. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Spennymoor

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

What we do on a new tarmac driveway

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

Covering Spennymoor

Survey cover and pricing for Spennymoor. Smaller towns such as Spennymoor are surveyed alongside nearby jobs in County Durham.

Postcodes
DL16, DL17
Area
County Durham
Nearest towns
Bishop Auckland (4 miles), Durham (5 miles), Newton Aycliffe (6 miles), Chester-le-Street (11 miles)
Pricing
North East, about 7% below our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Bishop Auckland, Durham, Newton Aycliffe, Chester-le-Street, Houghton-le-Spring.

Layer by layer

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Spennymoor: common questions

How long does a new tarmac driveway take in Spennymoor?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Spennymoor surveys alongside other jobs in County Durham, and give you dates once the specification is agreed.

Do I need permission for a new tarmac driveway in Spennymoor?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Is the survey in Spennymoor free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you work in my part of Spennymoor?

We cover Spennymoor including DL16, DL17, and nearby Bishop Auckland, Durham, Newton Aycliffe.

Other work in Spennymoor

Tell us what you have in mind for Spennymoor and we'll book a survey and put the specification in writing.

Free survey for new surfacing

New tarmac driveways in Spennymoor: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price