New tarmac driveways in Banbridge

New tarmac driveway prices in Banbridge

For Banbridge, we apply the Northern Ireland rate, about 12% below our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£53–£84 per m²
Example: 30 m² drive	£1,750–£2,750
Example: 50 m² drive	£2,650–£4,200
Example: 80 m² drive	£4,200–£6,700

As a 2026 guide in Banbridge, new tarmac driveway work runs at about £53–£84 per m² including VAT, so a 80 m² drive is roughly £4,200–£6,700. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Banbridge

In Northern Ireland, the Planning (General Permitted Development) Order (Northern Ireland) 2015 allows a hard surface between the front of a house and a road without permission if it is porous or drains to a porous area within the property, once it exceeds 5 m². Listed buildings and some access changes need permission. Any new or altered vehicle access onto a public road needs approval from DfI Roads, not the council.

Banbridge: the local details

What applies in Banbridge. Smaller towns such as Banbridge are surveyed alongside nearby jobs in County Down.

Postcodes: BT32
Area: County Down
Nearest towns: Craigavon (8 miles), Portadown (8 miles), Newry (12 miles), Castlereagh (22 miles)
Pricing: Northern Ireland, about 12% below our UK midpoint
Kerb approvals: DfI Roads

We also cover nearby Craigavon, Portadown, Newry, Castlereagh, Downpatrick.

Layer by layer

What we do on a new tarmac driveway

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

Break out and remove the old surface and spoil
Dig to formation level, usually around 230–250 mm below finished height
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Concrete-haunched kerbs or a block-paved border as edge restraint
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled

Questions about new tarmac driveways in Banbridge

Which Banbridge postcodes do you cover?

We cover Banbridge including BT32, and nearby Craigavon, Portadown, Newry.

What approvals apply in Banbridge?

In Northern Ireland, more than 5 m² of hard surface in front of a house should be porous or drain to a porous area within the property; DfI Roads approves dropped kerbs. Dropped kerbs are approved by DfI Roads.

Can I get a free survey in Banbridge?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How much does a new tarmac driveway cost in Banbridge?

As a 2026 guide in Banbridge, new tarmac driveway work runs at about £53–£84 per m² including VAT, so a 80 m² drive is roughly £4,200–£6,700. Edging, drainage and a dropped kerb are priced separately where needed.

Other work in Banbridge

Questions about new tarmac driveways in Banbridge? Call, WhatsApp or use the form, and we'll talk it through.