New tarmac driveways in Rhosllannerchrugog

What does a new tarmac driveway cost in Rhosllannerchrugog?

For Rhosllannerchrugog, we apply the Welsh rate, about 5% below our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£57–£90 per m²
Example: 30 m² drive	£1,900–£3,000
Example: 50 m² drive	£2,850–£4,500
Example: 80 m² drive	£4,550–£7,200

As a 2026 guide in Rhosllannerchrugog, new tarmac driveway work runs at about £57–£90 per m² including VAT, so a 80 m² drive is roughly £4,550–£7,200. Guide only; the survey confirms a fixed price.

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
Dig to formation level, usually around 230–250 mm below finished height
Concrete-haunched kerbs or a block-paved border as edge restraint
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Do I need permission in Rhosllannerchrugog?

In Wales, a new hard surface in front of a house is permitted development only if it is porous or drains to a permeable area within the property; repairing or replacing up to 5 m² of existing hardstanding is allowed without meeting that condition. Separately, since January 2019, construction covering 100 m² or more that affects drainage generally needs approval from the council's SuDS Approving Body (SAB) before work starts, even where planning permission is not needed. Larger drives, shared surfaces and car parks often reach that threshold. Any new or widened crossing over the pavement needs approval from the council as highway authority.

Covering Rhosllannerchrugog

Rhosllannerchrugog at a glance. Smaller towns such as Rhosllannerchrugog are surveyed alongside nearby jobs in Clwyd.

Postcodes: LL14, LL20
Area: Clwyd
Nearest towns: Wrexham (4 miles), Buckley (11 miles), Mold (11 miles), Hawarden (12 miles)
Pricing: Wales, about 5% below our UK midpoint
Kerb approvals: The council

We also cover nearby Wrexham, Buckley, Mold, Hawarden, Deeside.

Rhosllannerchrugog: common questions

How long does a new tarmac driveway take in Rhosllannerchrugog?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Rhosllannerchrugog surveys alongside other jobs in Clwyd, and give you dates once the specification is agreed.

What is the price of a new tarmac driveway in Rhosllannerchrugog?

As a 2026 guide in Rhosllannerchrugog, new tarmac driveway work runs at about £57–£90 per m² including VAT, so a 80 m² drive is roughly £4,550–£7,200. Edging, drainage and a dropped kerb are priced separately where needed.

Can I get a free survey in Rhosllannerchrugog?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Are there planning or highway rules in Rhosllannerchrugog?

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Dropped kerbs are approved by the council as highway authority.

Also in Rhosllannerchrugog

Ready for a price in Rhosllannerchrugog? Use the guide price tool or send the form, and we'll arrange a visit.