Driveways and paths · Clwyd

New tarmac driveways in Deganwy

New tarmac driveways in Deganwy start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

DEGANWY GUIDE£57–£90 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

What does a new tarmac driveway cost in Deganwy?

These Deganwy guide prices reflect rates in Wales, about 5% below our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£57–£90 per m²
Example: 30 m² drive£1,900–£3,000
Example: 50 m² drive£2,850–£4,500
Example: 80 m² drive£4,550–£7,200

As a 2026 guide in Deganwy, new tarmac driveway work runs at about £57–£90 per m² including VAT, so a 50 m² drive is roughly £2,850–£4,500. Guide only; the survey confirms a fixed price.

The build-up we price

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Rules that apply in Deganwy

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. A vehicle crossing over the footway is a separate approval, from the council as highway authority.

What is included in a new tarmac driveway?

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Break out and remove the old surface and spoil
  • Dig to formation level, usually around 230–250 mm below finished height
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled

Deganwy: the local details

Deganwy at a glance. Deganwy is covered on our Clwyd rounds, 39 miles from Wrexham.

Postcodes
LL31, LL32, LL34
Area
Clwyd
Nearest towns
Llandudno (1 mile), Colwyn Bay (4 miles), Abergele (10 miles), Rhyl (14 miles)
Pricing
Wales, about 5% below our UK midpoint
Kerb approvals
The council

Nearby, we work in Llandudno, Colwyn Bay, Abergele, Rhyl, Prestatyn.

Your questions answered

How long does a new tarmac driveway take in Deganwy?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Deganwy surveys alongside other jobs in Clwyd, and give you dates once the specification is agreed.

Which Deganwy postcodes do you cover?

We cover Deganwy including LL31, LL32, LL34, and nearby Llandudno, Colwyn Bay, Abergele.

New tarmac driveway cost in Deganwy: what should I budget?

As a 2026 guide in Deganwy, new tarmac driveway work runs at about £57–£90 per m² including VAT, so a 50 m² drive is roughly £2,850–£4,500. Edging, drainage and a dropped kerb are priced separately where needed.

Can I get a free survey in Deganwy?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Deganwy

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Deganwy.

Free survey for new surfacing

New tarmac driveways in Deganwy: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price