New tarmac driveways in Sandbach

What does a new tarmac driveway cost in Sandbach?

These Sandbach guide prices reflect rates in the North West, about 3% below our UK midpoint.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£58–£92 per m²
Example: 30 m² drive	£1,900–£3,050
Example: 50 m² drive	£2,900–£4,600
Example: 80 m² drive	£4,650–£7,350

As a 2026 guide in Sandbach, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 50 m² drive is roughly £2,900–£4,600. Guide only; the survey confirms a fixed price.

What is included in a new tarmac driveway?

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
Geotextile membrane where the ground is soft or clay
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Rules that apply in Sandbach

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Covering Sandbach

Survey cover and pricing for Sandbach. We cover Sandbach by grouping surveys with nearby Cheshire jobs; Warrington is 19 miles away.

Postcodes: CW11, CW4
Area: Cheshire
Nearest towns: Crewe (5 miles), Congleton (6 miles), Kidsgrove (7 miles), Winsford (7 miles)
Pricing: North West, about 3% below our UK midpoint
Kerb approvals: The highway authority

Close to Sandbach: Crewe, Congleton, Kidsgrove, Winsford, Biddulph.

Your questions answered

What approvals apply in Sandbach?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Is the survey in Sandbach free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What is the price of a new tarmac driveway in Sandbach?

As a 2026 guide in Sandbach, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 50 m² drive is roughly £2,900–£4,600. Edging, drainage and a dropped kerb are priced separately where needed.

How long does a new tarmac driveway take in Sandbach?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Sandbach surveys alongside other jobs in Cheshire, and give you dates once the specification is agreed.

Also in Sandbach

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Sandbach.