Driveways and paths · Cheshire

New tarmac driveways in Runcorn

Every new tarmac driveway we price in Runcorn comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

RUNCORN GUIDE£58–£92 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in Runcorn?

For Runcorn, we apply the North West rate, about 3% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£58–£92 per m²
Example: 30 m² drive£1,900–£3,050
Example: 50 m² drive£2,900–£4,600
Example: 80 m² drive£4,650–£7,350

As a 2026 guide in Runcorn, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 80 m² drive is roughly £4,650–£7,350. Guide only; the survey confirms a fixed price.

What we do on a new tarmac driveway

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Break out and remove the old surface and spoil
  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Falls set so water runs to a channel, gully or soft landscaping

How it is built

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Do I need permission in Runcorn?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Covering Runcorn

What applies in Runcorn. We reach Runcorn on our Cheshire survey days; Warrington is 7 miles away.

Postcodes
WA7, WA6
Area
Cheshire
Nearest towns
Widnes (1 mile), Halewood (4 miles), Speke (5 miles), Great Sankey (5 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Widnes, Halewood, Speke, Great Sankey, Huyton.

Your questions answered

How quickly can work start in Runcorn?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Runcorn surveys alongside other jobs in Cheshire, and give you dates once the specification is agreed.

Which Runcorn postcodes do you cover?

We cover Runcorn including WA7, WA6, and nearby Widnes, Halewood, Speke.

Will someone visit before I get a fixed price in Runcorn?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do I need permission for a new tarmac driveway in Runcorn?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Also in Runcorn

Ready for a price in Runcorn? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

New tarmac driveways in Runcorn: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price