Car park resurfacing in Yate
We work with managing agents, landlords, schools, surgeries and businesses on car park resurfacing jobs around Yate, phasing the work so sites can keep operating.
How much should I budget in Yate?
Guide prices below are for Yate, adjusted for the South West, where surfacing rates run about 3% above our UK midpoint.
| Item | Guide price (ex VAT) |
|---|---|
| Car park resurfacing: tack coat and 40 mm surface course overlay | £21–£36 per m² (£25–£43 inc VAT) |
| Plane and inlay: plane off worn surface, 40 mm new surface course | £27–£43 per m² (£32–£52 inc VAT) |
| Example: 200 m² car park | £4,100–£7,200 (£4,900–£8,650 inc VAT) |
| Example: 500 m² car park | £10,300–£18,050 (£12,350–£21,650 inc VAT) |
| Example: 1,000 m² car park | £18,950–£33,150 (£22,750–£39,800 inc VAT) |
As a 2026 guide in Yate, car park resurfacing work runs at about £21–£36 per m² excluding VAT, so a 200 m² car park is roughly £4,100–£7,200. Guide only; the survey confirms a fixed price.
Do I need permission in Yate?
Householder permitted development covers houses only. Car parks, yards, flats and business premises follow normal planning rules: resurfacing an existing area on the same footprint is generally fine, while a new car park, a change of use or new drainage may need permission. Check with the planning authority before any new hard area.
What is included in car park resurfacing?
Car park resurfacing renews the wearing surface of an existing car park: either an overlay, laying a new surface course on top after repairs and a bond coat, or plane and inlay, milling off the worn layer and replacing it at the same level.
- Planing to remove worn surface or at tie-ins
- Bond coat sprayed on the prepared surface
- New surface course, typically 40 mm, laid by paver and rolled
- Ironwork raised to the new level
- Lining and markings renewed
Where we work in and around Yate
What applies in Yate. Yate is covered on our Gloucestershire rounds, 24 miles from Gloucester.
- Postcodes
- BS37, BS36, GL9, GL12, BS32
- Area
- Gloucestershire
- Nearest towns
- Keynsham (9 miles), Bristol (10 miles), Bath (12 miles), Stroud (17 miles)
- Pricing
- South West, about 3% above our UK midpoint
We also cover nearby Keynsham, Bristol, Bath, Stroud, Cirencester.
The build-up we price
Questions about car park resurfacing jobs in Yate
What approvals apply in Yate?
Householder permitted development covers houses only. Car parks, yards, flats and business premises follow normal planning rules: resurfacing an existing area on the same footprint is generally fine, while a new car park, a change of use or new drainage may need permission. Check with the planning authority before any new hard area.
Will someone visit before I get a fixed price in Yate?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
How long does car park resurfacing take in Yate?
Often 1–3 days for a small car park. We book Yate surveys alongside other jobs in Gloucestershire, and give you dates once the specification is agreed.
Car park resurfacing cost in Yate: what should I budget?
As a 2026 guide in Yate, car park resurfacing work runs at about £21–£36 per m² excluding VAT, so a 200 m² car park is roughly £4,100–£7,200. Drainage, kerbs and lining are itemised separately.
Also in Yate
- Tarmac driveway repairs
- Tar and chip driveways
- Private and access road surfacing
- Tarmac paths and footpaths
- Permeable tarmac driveways
- New tarmac driveways
- Everything in Yate
Ready for a price in Yate? Use the guide price tool or send the form, and we'll arrange a visit.
Car park resurfacing in Yate: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED